Search results

I charge the batteries for this heli. I install the battery and bind it to my Tx. When I try to fly it sometimes, the rotor will spin up to a slow speed and stay there. I have to pick up the heli and unplug the battery. Sometimes it will work the next time and other times I have to do this 2 or...

I want to start gathering information on converting my glow engine plane to electric. It currently has a Thunder Tiger Pro .46 ball bearing motor. If I remember correctly it has a 6x4 prop, may not be right. Where do I start to gather info on getting the right parts?

Little mushroom thing-a-ma-jig on top?

If I'm in a hurry to go fly but don't want to wait 25-30 minutes on the charger, is it bad practice to give the battery a partial charge? Do they have a memory that will prevent them from fully charging in the future?

As the title says, is the price of the parts worth it? I have broken two balls off the blade grips on my msrs. The price of a new set of grips from amain is $3.99. A set of grips on MH is $20. I will have to get the rotor head also. That's another $19. So $39 for a cool looking head/grip...

Got this board from aliexpress and upon connecting it to my charger and pluggin in a battery, it told me it was reverse polarity. What's up with this chinese junk? Sure I can just swap the banana plugs but that ain't gonna cut it. I'll resolder the wires correctly. 3.7V Capacity Lightweight...

Got this heli and am concerned about a bit of binding in the main shaft. You can see in this video that the tail rotor spins and the rotor head wants to go but can't. I have looked at the gear mesh and it looks very tight. I'm thinking that the main gear may be too big by a tooth or so. I have...

Need a spm file for the DX6e. The manual does not seem clear enough to me.

When flying into the wind it seems that my 120s wants to gain altitude. I have tried to figure this out but don't understand it. The only thing that makes sense to me is it basically is acting like an airplane taking off into the wind. It's just easier to climb when into the wind than with a...

Got new blade grips and the replacements stated on the package that they are for a 120sr. Both the s and sr versions have the same part number. They fit but the blades are pretty tight in them. I have thought about using vaseline but that stuff is messy. The blades are supposed to be a little...

Helis are down so I stole my son's mini quad for a short flight. Little H8s are fun.

Flew a little bit this morning and had a little fun. No wind. Was going to fly this evening with little wind. Started out at the driveway and was going to fly out to the field. Got about 20' up and the wind got stupid. It blew the heli toward a tree and I hit the throttle to get it above the...

Seems a good deal for what you get. $24.99. Ares RC Nanos FP 75 RTF Micro Heli w/2.4GHz Radio [AZSH2200] | Helicopters

Charged all my batteries today and went out to fly. Ran out on battery and switched to another. Flew it for about 3 minutes then the heli lost power and fell out of the air at about 4 feet. Red led was flashing and inputs were not working. I replugged the battery and flew it another minute or...

If I charge 6 1s cells in parallel, how can the charger keep track of the cells' voltages correctly? Should I rig up some kind of balance cable?

Anyone ever used this brand? Seems a pretty good deal. 6 for $18.99.

Max wind speed for the Blade 120S is 3MPH. Max wind speed today was 9MPH. However there were some calm spaces where the heli flew well. Did some fast passes practicing quick turns (whatever it's called...). This little thing is pretty fast. The high wind speeds gave me some practice fighting the...

I want to build my own charging board for my small lipos that have the jst/bec type ends. Where can I find pcb mount versions? These are the ones jst bec - Google Search:

Thinking of buying a Blade mSR S. What are your opinions on this heli? Should I stay away from this one?

Got this case at harbor freight and think it fits the heli nicely with room to spare. I removed the tool holder and put the eggshell(?) foam thing in the top. I had to add a square of foam between that and the top to hold the transmitter in place.