1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

Articles

These are the motors that I'm running on FrankenQuad, and they are absolutely fantastic. At first, I was worried because you can pick up 4 of them for $31.69, which is extremely cheap! But once I fired them up and flew them for the first time, my mind changed to LOVING these motors. As you all know, I have the DarkMax quad and on 4s, that thing is a MONSTER! I think these motors are right there with the DarkMax motors! I'm running these on 4s with 5045 props (instead of 5152's on the...
On Sept. 22 2016 I received the GoolRC Quad and I loved the layout of the frame! Great amount of room for the flight controller stack, a dedicated place for a VTX and multiple mounting options for a camera! Because of some unfortunate actions taken by the company that shipped the GoolRC to me, I stopped promoting that quad, but I still loved the frame. Fast forward to today and I have another frame just like the one mentioned above. It is the Lisam LS-210 frame and it is exactly like the...
DX9
I had a Subscriber on YouTube ask me how you adjust the stick tension on the DX9 and instead of just typing out a reply, I decided to make a quick little video on how to adjust your stick tension. Hope this helps someone out that was worried about tearing up their transmitter right after they purchased it lol.

How To Glue Rc Car Truck Tires

Author Rating:
5/5,
9116 Truggy - 9116 1/12 Scale 2WD 2.4G 4CH RC Monster Truck - RTR -$42.99 Online Shopping| GearBest.com If you guys remember when I did the review, my 3 complaints about this truck were the non oil filled shocks, which I replaced with oil filled shocks, the very tight and crunchy diff which I have since freed up and did a video on (click the "i" in the video) and the non foam filled tires. Today, we take care of the third issue! In this video, I show you how I glue up Rc car or truck...
600/700 Feathering Shaft Wrench - [URL]http://amzn.to/2CTtvfc[/URL] 450/500 Feathering Shaft Wrench - [URL]http://amzn.to/2CU5GUt[/URL] It is time to get Murphy back up in the air. But before I would feel safe flying this helicopter, we need to go completely through him and clean and lube every part of this helicopter. If it needs cleaned, we are going to clean it, if it needs to be adjusted, we are going to adjust it! This series is all in thanks to Syndicate who suggested we do a complete Maintenance Series,...
Over the years, I keep hearing about someone getting injured in this hobby. It doesn't matter if they are working on or playing with a helicopter, airplane, car, truck, boat, hovercraft, I have heard of injuries from everything. Lets try to create a movement to motivate people to always remove their props, blades, pinions or tires, and lets make this hobby safe! No more people need to go to the hospital because of a hobby that they do for fun!
Tattu 650mah 4s Battery - TATTU 650mAh 14.8V 4S 75C Li-polymer Battery -$13.84 Online Shopping| GearBest.com XT60 Connectors - Special Design 10 Pairs XT60 Male + Female Bullet Connectors Plug for RC Lipo Battery -$6.57 Online Shopping| GearBest.com Soldering Holder Review - Qx Aluminum Alloy Multifunctional Soldering Station Xt60 Xt90 T Banana Plug I had the Furibee X140 sent to me, and I decided on the batteries by reading the questions at the bottom of the page. In one question, it was...
Sometimes the most simple solutions are over looked. That is exactly what happened to me when I only needed to charge a single small battery. In this video, I show you my solution to this little issue!
If there is one thing that can ruin your day faster than anything, it's when a cold solder joint decides to finally come apart resulting in a crash! Always double check the factories soldered connections before it ends up costing you money!
Furibee X140 FLYSKY - FuriBee X140 140mm Micro Brushless FPV Racing Drone BNF WITH FLYSKY RECEIVER-$153.73 Online Shopping| GearBest.com Furibee X140 FRSKY - FuriBee X140 140mm Micro Brushless FPV Racing Drone BNF WITH FRSKY RECEIVER-$110.99 Online Shopping| GearBest.com Furibee X140 FM800 - FuriBee X140 140mm Micro Brushless FPV Racing Drone BNF WITH FM800 RECEIVER-$174.88 Online Shopping| GearBest.com Furibee X140 PNP - FuriBee X140 140mm Micro Brushless FPV Racing Drone PNP-$145.21 Online...
Voltage Tester - Battery Voltage Tester Battery Monitor Buzzer Alarm For 1S-8S Lipo Battery This Lipo Voltage Checker for my batteries was actually included with a quad I did a review on that only had a 2s battery! I never did use it on that quad, but I have used it on every single batter that I wanted to parallel charge! This thing has become a staple in my charging setup. In one of our live streams, it was asked if you can mount this on the side of a helicopter or in a car, and the...
Ball Link Pliers - Ball Link Plier RC Helicopter Airplane Car Repair Tool Kit Tool Never in my life did I think I would want or need these pliers, until I had them in my hand! These things make working on a helicopter so much easier, especially for the antirotation linkage and the swash drivers! If you are into helicopters and don't have a pair of these yet, do yourself a favor and click on the link above and get a pair of them! They are well worth the $5.00 they cost!
10 piece Tool Kit - 10 in 1 Set Repairing Tools Kit Box Hex Screwdriver Cutter Pliers For RC Models Black 7pcs Driver Set - 7pcs 1.5/2/2.5/3/4/5.5mm Hexagonal Screwdriver Tool Set For RC Model Gold Awesome HSS Hex Drivers - 4PCS HSS Titanium Black Hex Screw Driver Repairing Hand Tool H1.5/2.0/2.5/3.0 A good tool kit can make this hobby much more enjoyable. I remember starting out with those little plastic handle allen drivers or worse yet, the L shape drivers. Investing in my first tool set...

Jumper T8sg Unboxing & Overview

Author Rating:
4.5/5,
Jumper T8SG Transmitter: Jumper T8SG Multi-Protocol 2.4G 10CH Compact Transmitter for Flysky Frsky DSM2 Walkera Devo Futaba After many people telling me that I needed to get this Tx, I finally have it. The Jumper T8SG is a Multi-Protocol 2.4G 10CH Compact Transmitter that can connect with just about anything out there. From Spektrum to Futaba to those little toy quads and heli's, this transmitter can control them all. In this video, I walk through just the basics of the transmitter. In...
As many of us have done, I used to just leave my tools laying all over my desk or work bench when working on projects. In the last tool review where I reviewed those little allen drivers, it was brought to my attention in the comments, and I had experienced myself that the tools liked to roll around if not on some kind of soft surface. That is when I decided to hit up Banggood and see about getting a tool holder for review. And they sent me the BEST ONE they have in stock!!! This tool...
Loading...