Im building a 250 quad from myrcmart.
x KK 2.1 Flight Controller (With Display) 0.00% USD19.99
4 x RCX 15A ESC Brushless Motor Speed Controller (SS Series) 0.00% USD25.96
1 x Multicopter Power Distribution Board (1-8 Connection / Blue / 45x45mm & 35x35mm)
- Color Substitution (if out of stock): Yes. RCX03-369 (Power Distribution Board in BLACK) 0.00% USD0.99
1 x RCX H250CF-3K (DT Version) FPV Quadcopter (Carbon Fiber / Barebone Frame) 0.00% USD24.99
2 x Propeller Mount (Φ5mm / CCW / H1806 / Silver Bullet)
- Color Substitution (if out of stock): Yes. Silver Color 0.00% USD3.98
1 x RCX H1806-6 2400KV Micro Outrunner Brushless Motor (4 x Motor / 16 x 5030)
Here are the specs on them
Continuous Current: 15A
Burst Current: 20A (10 Seconds)
Battery Cell: 4-12NiMH NiCd / 2-3 Li-Po
Weight: 16g
BEC Output :5V/3A (Linear Mode)
Size: 40*24*8mm (L*W*H)
MCU: Atmega
Suitable SimonK Firmware: tp.hex (if you want to flash it by yourself)
x KK 2.1 Flight Controller (With Display) 0.00% USD19.99
4 x RCX 15A ESC Brushless Motor Speed Controller (SS Series) 0.00% USD25.96
1 x Multicopter Power Distribution Board (1-8 Connection / Blue / 45x45mm & 35x35mm)
- Color Substitution (if out of stock): Yes. RCX03-369 (Power Distribution Board in BLACK) 0.00% USD0.99
1 x RCX H250CF-3K (DT Version) FPV Quadcopter (Carbon Fiber / Barebone Frame) 0.00% USD24.99
2 x Propeller Mount (Φ5mm / CCW / H1806 / Silver Bullet)
- Color Substitution (if out of stock): Yes. Silver Color 0.00% USD3.98
1 x RCX H1806-6 2400KV Micro Outrunner Brushless Motor (4 x Motor / 16 x 5030)
Here are the specs on them
Continuous Current: 15A
Burst Current: 20A (10 Seconds)
Battery Cell: 4-12NiMH NiCd / 2-3 Li-Po
Weight: 16g
BEC Output :5V/3A (Linear Mode)
Size: 40*24*8mm (L*W*H)
MCU: Atmega
Suitable SimonK Firmware: tp.hex (if you want to flash it by yourself)