My servos have never gotten hot
This yesterday when I maddened my 7200bx on my vibe ... Servos came down cool. Outside temp ~45F
Fly safe!!have fun!
did you apply any counter force on the blades or the swash plate? This is necessary in order to get reliable results. You need to get the current peaks which cut the voltage down.
If no counter force is being applied this test is like testing a car in a garage while lifting it up and pushing the accelerator pedal down the floor – the engine will run at high rpm and get hot but as no friction is applied on the wheels you never know if the engine has enough power to take you over a hill
Did you set up your Fixed end points for the CC ESC. It took me a while to get that sorted. Ended up having to rebind the RX then all worked smoothly.
It worked, but spool up wouldn't start till 1/4 throttle.
btw I would strongly recommend to use a teflon heat shrink tubing on the tail control rod on the places where it touches the tail rod guides
what you gonna do with your plastic setup ?I can take it.. heehee
![]()
its like seeing the light at the end of a tunnel. now the real fun begins
I can't remember if this is going to be 6S or 12S. If 6S, are you going to running two in Parallel?