Search results

Never say never but it seems unlikely on the face of it that they could squeeze 4000mAh into a battery that would fit into a compartment meant for a 2000mAh ?

Sounds like the 770 would be ideal. The 3 blade tail on the 770 Sport is good for lower HS but the two blade works fine too if you fit the speedup tail pulley And 115mm blades

The blinky multi-coloured lights of the Microbeast are a cryptic mystery to me:confused: It seems very strange that the FBL that comes with the kit doesnt work with the recommended servo ball positions? Having said that, having the balls on the outer holes of the servo arms shouldn't cause any...

Hi Lee, favourite is a hard one. Ive been flying the Kraken a lot lately but that's mainly because it's one of my newest. The way they compare for me is: 770 - Great all rounder, smooth and stable but still capable of hardcore 3D, though not as responsive and agile as a 700. The 770 flies...

The original TDR that was first made around 2009 is out of production but still supported with spares (I have one of those too!). The current Henseleit range is: The one you see here is the TDR2 which is still very much a current model. The TDF which takes over were the original TDR left off...

Good call by Geena. Make sure to regularly lubricate those gears because they can overheat and melt their housing causing the gears to grind their way through the side of the frame.

Quite the opposite. If you lower the headspeed then you sometimes need a higher speed tail drive gearing ratio. When you lower the headspeed then the tail speed also decreases causing poor tail hold. It's a moot point on most 250 size helis anyway because very few have different tail drive...

The Tactic TTX610 is a stand alone 6 channel 2.4GHz transmitter. Tactic TTX610 6-Channel 2.4GHz SLT Transmitter w/TR625 [TACJ2610] | Airplanes I cant say anything more than what can be gleaned from the online spec and manual. It looks like it's a decent enough entry level transmitter for...

Good that you got it sorted!

If you want something genuinely different with quality and engineering second to none you could at the Henseleit range

Thank Uri, she is a fantastic heli for sure:biggrin1: it's a design that grows on you more and more as you start to appreciate the clever little deign features that Henseleit built in. This is not the 'all out' speed version, a limited run was made of a no compromise speed version called the...

I think Uri may have nailed it with the FBL orientation setting

Sounds like you have the collective channel reversed in the Tx. It's a while since I setup a Vbar but assuming the software is the same as when i last used it:- When you get to the 'Transm' tab you have to make sure that all the sliders are moving the correct way. When you move the collective...

Heli bearings are usually of the shielded type. They are factory packed with grease and not intended to ever need further lubrication. The only places that need regular lube are the tail and main shafts where the swash and tail pitch slider travel.

:chuckles:Thanks guys, considering I promised not to buy any new helis last year my fleet is expanding nicely:encouragement:

Here's the TDR2 out to play with a couple of it's stable mates last weekend. Great conditions for a change!

By default tail gain is set to channel 5. You should see the bar move on the gain channel in the setup software’s ‘diagnostic’ screen when you change gain in the Tx. you can un-allocate gain from its channel and make changes in the software instead but you would normally only do that if short...

Any questions when it comes to setup dont hesitate to ask.

I’ll probably try a few high speed runs but build up to it slowly.

Thanks guys. I'll get another video once i get confidence to push it a bit harder, though dont expect anything too spectacular;)