Search results

I am in the process of charging some nimh cells similar to the 18650 liIon. These are 4000 mAh cells and fit nicely in the 19650 holders. I set the charger to nimh and 2A charge rate, automatic, and cur limit. It charged a cell for about 15mins and then started beeping while displaying on the...

No idea what this camera is and what vtx it needs.

Is it a fuse? This is on a LiIon battery. There is no voltage at the solder joints but the cell has 3v.

I got to wondering about running my charger setup from my truck on the inverter. I have a Schumacher 750w ac inverter that I think will work if I attach it directly to the battery. So I started by exposing the inner wires of a computer style PSU cord and plugging it into my Dell Z750P-00 power...

US$8.99 31% URUAV MC-6S 1-6S Lipo Battery Voltage Checker Receiver Signal Tester RC Parts from Toys Hobbies and Robot on banggood.com

I am in the process of charging my NiMh packs and got to thinking, am I charging them at the correct amperage? I have a 7.2v 6 cell pack 1800mAh. I am charging it at 1A in current limiting mode. The pack is warm and I'm thinking that it's probably ok. But is that charge rate really too much? My...

Gonna take it to work and show it off to a coworker. Maybe he will get bit by the bug and buy himself one.

So. I have the Tmaxx that I restored and got to thinking. It would be nice to have one that was electric. Is it worth doing and is the cost as opposed to the price of fuel now feasible?I'd have to get a motor, mounting hardware, esc, batteries, bec if the esc doesn't haveone, etc. This is just...

A week and a half ago, I went to the local verizon corporate store and got a new phone. My other one suffered a 1 foot fall from my pocket striking a fire hydrant on the edge of the screen (phone case was on). Now half the screen does not work. I figured it was time for an upgrade, reluctantly...

Has anyone on here ever had any real luck on gluing their seat back on their lawnmower? I have an Exmark zero turn and the seat has completely came off the base. I can't find any solid evidence that there is anything worth using. The seat is foam with a polyurethane or vinyl covering. The seat...

Post 'em up! I just updated my 6" quad to betaflight 4 and really don't understand what could be so different. There is a little difference in the interface but as far as the firmware goes, beats me. BTW: My stack-x controller uses Fishdrone4 firmware for what it's worth.

I saw this on youtube and thought if anyone wanted to build their own this kit is right on. And the best part is it's less than $20. US$21.99 RX5808 5.8Ghz 48CH FPV Receiver with 480*320 5 Inch HD Display Snow Screen Monitor DIY For FPV Goggles RC Parts from Toys Hobbies and Robot on banggood.com

Just wondering what happened to the HPI video. I was going to watch it but it's now unavailable. Server 400 error.

It's a ball swivel mount for a security camera mount. I think it's a ball hitch really...

I can't post in the blog with pictures but wanted to share this with @Tony. I acquired this from a previous tenant and absolutely love this thing. I no longer have to fiddle with trying to separate the filters with my fingers. You simply pop the top and pick out a single filter. Simple. Highly...

My hair stood up on end when I watched this.

Just saw this on Amazon. $18.99. Ovonic 14.8V 1550mAh 100C 4S LiPo Battery Pack with XT60 Plug for FPV Racing RC Quadcopter Helicopter Airplane Multi-Motor Hobby DIY Parts

That cinnamon rolls couldn't get any better. They went and done this.

Found this in the clearance aisle for $60. I also bought the $6 warranty. Will probably make a claim on it as I think it has a bad battery. Still will come out ahead. EVERSTART 600/1200A Jump Starter w/ 120 PSI Compressor & Inverter (J45TKE)...

I have this old 5hp outboard motor that I didn't run for some time. It got to the point that it wouldn't start. I am very bad at working on these things and tried a couple times to work on it with no luck. Then I decided to buy some B1 chemtool carb cleaner in the gallon jug. I disassembled the...