500 tail drift and wag

[aquwaman]

Hi guys I have come across something else I dont know how to adjust. I was leveling the swash in dir mode and my sub trims are ail +27 ele +100 and pit -94 and that levels it perfect at mid stick and at full stick but at low stick the ele servo drops abit lower. Im sure when I set the travel adjustment it shouldnt travel that low to show it.

Now my main problem is when I turn the 3gx on normally and check swash level the ail servo drops about 1.5mm off the level tool and stays there at any stick postion

Any thoughts?

 

[murankar]

I dont know any thing about 3gx. So someone with experience is going to have to help out.

The first issue is usually handled by the travel adjustment in the gyro. The second issue could be due to the heli being on the bench and not hovering.

Sent from my LG-E980 using Forum Runner