Hey guys, im newly registered, but ive been reading here for a few weeks, GREAT info and some great people on here too, and im glad to now be a part of this community!
I have recently decided to enter the world of rc heli by buying a hk500 from hobbyking and putting it together myself! GREAT fun, its all together apart from the battery mounted onto it, the specs are:
HK YEP 100A esc
Turnigy heli drivt t500 1600kv
revolution carbon blades
2650 6s turnigy nano tech battery
sanwa srm-102 for tail sero (came with rc car tx so dremeld a bigger hole to mount it)
gs-d9275 servos for the swash (not the best but prob will be crashing here n there n will bring repair costs down)
align 3gx gyro
turnigy 9x
n a few bits n pieces that dnt matter..
No the problem im having is quite wierd! i ABSOLUTELY CANNOT find anything like this on any forum to help me out, so i thought id just come direct, i was gonna sign up sooner or later anyway lol
my swash plate is lined up, all servos 90deg or closest i can get,
when i push the throttle up & down, 2 go up 1 goes down, and the movement is great until i reverse the ail, and the swash plate moves inline like it should but at top & bottom the ail servo is tottaly out of line, they move in conjuction with each other but dont line up at full throttle.. when i go into the swash mix and adjust the ail nothing changes! but the elev and pitch when changed do exactly what they should! I should not have to reverse the ail, i should just go into swashmix make the number say -60 instead of +60 and it should be sweet! isnt that right? when the throttle is max, if i push it to the left half way the swash levels out, i am totally lost here, i have been researching the last 5 days on how to set this up and i thought i had sufficient info to do so!
This is reallly plaing on my brain, i have been taking my time caus i want everything to be great and setup properly, rather then rushing and stuffing things up..
If you guys can help me out, i would GREATLY appreciate it!
Thanks in Advance!!
I have recently decided to enter the world of rc heli by buying a hk500 from hobbyking and putting it together myself! GREAT fun, its all together apart from the battery mounted onto it, the specs are:
HK YEP 100A esc
Turnigy heli drivt t500 1600kv
revolution carbon blades
2650 6s turnigy nano tech battery
sanwa srm-102 for tail sero (came with rc car tx so dremeld a bigger hole to mount it)
gs-d9275 servos for the swash (not the best but prob will be crashing here n there n will bring repair costs down)
align 3gx gyro
turnigy 9x
n a few bits n pieces that dnt matter..
No the problem im having is quite wierd! i ABSOLUTELY CANNOT find anything like this on any forum to help me out, so i thought id just come direct, i was gonna sign up sooner or later anyway lol
my swash plate is lined up, all servos 90deg or closest i can get,
when i push the throttle up & down, 2 go up 1 goes down, and the movement is great until i reverse the ail, and the swash plate moves inline like it should but at top & bottom the ail servo is tottaly out of line, they move in conjuction with each other but dont line up at full throttle.. when i go into the swash mix and adjust the ail nothing changes! but the elev and pitch when changed do exactly what they should! I should not have to reverse the ail, i should just go into swashmix make the number say -60 instead of +60 and it should be sweet! isnt that right? when the throttle is max, if i push it to the left half way the swash levels out, i am totally lost here, i have been researching the last 5 days on how to set this up and i thought i had sufficient info to do so!
This is reallly plaing on my brain, i have been taking my time caus i want everything to be great and setup properly, rather then rushing and stuffing things up..
If you guys can help me out, i would GREATLY appreciate it!
Thanks in Advance!!