Heliman450
Well-Known Member
Hi all,
I just finished building my wife's birthday present to me............... a Kyle Stacy Goblin 380. I fitted a Spirit Pro having already used one on my T-Rex 550.
I attempted my first test hover this morning only to find that it will be impossible to lift it from the ground without it destroying itself. Fortunately, I fitted my test gear so there was no damage to the heli.
This time, I used the setup wizard and chose 'Goblin 380'. I suspect that this is where my problem lies as the standard 380 is a 2-blade setup. Of course, the manual isn't of any help here as it's a kit, however, it does say something about a 3-bladed heli needing about 30% less gain than for 2-bladed.
Any help appreciated.
I just finished building my wife's birthday present to me............... a Kyle Stacy Goblin 380. I fitted a Spirit Pro having already used one on my T-Rex 550.
I attempted my first test hover this morning only to find that it will be impossible to lift it from the ground without it destroying itself. Fortunately, I fitted my test gear so there was no damage to the heli.
This time, I used the setup wizard and chose 'Goblin 380'. I suspect that this is where my problem lies as the standard 380 is a 2-blade setup. Of course, the manual isn't of any help here as it's a kit, however, it does say something about a 3-bladed heli needing about 30% less gain than for 2-bladed.
Any help appreciated.