Scale Need lower head speed

So of you go left and right on each one and then center them it doesn't come up with "OK"?
 
Have tested and this works OK

System Setup
Channel Assignment
(Rx Assignment Screen)
NEXT
(Channel Input Screen)
Select your channel
Then scroll through to LLv or RLv

Although on my Tx the sliders appear to be available to calibrate all the time even if not assigned.
 
Last edited:
Hi Tony and Keith, mine does not do that at all , if I go to the stick calibration , I can calibrate throttle and cyclic and they come back as OK , But it then wants the sliders as it does in your video , but I can move them till my fingers drop off it does not see them and I cant save the calibration I did on the sticks
 
Very interesting. I will have to look more into this. Can you upload your file in a zip folder to this thread so i can have your exact settings?
 
Hi Tony here is the file for the cobra I hope this helps its just like the sliders are not active so I cant calibrate sticks
 

Attachments

Last edited:
Hi Neil, tried your file in the standard DX9 and had several issues, which were probably caused by mine having an older version of the firmware, I did not get as far as calibration before the timer, that started automatically, ran out and locked the Tx up with a deafening scream, I was able to re-boot the Tx into the Menu and change models which fixed the problem then deleted your model. Sorry I couldn't help any further help, I hope Tony has better results.
 
I will see what I can do to put this in my Tx and have a look.

With what Keith stated above, I'm kind of worried about it though. Have you tried creating a completely new model in the DX9? Just wondering. I will post back when I have it in my Tx.
 
The timer didn't start on me automatically, and I was able to do through it. I was also able to go into the calibration menu and calibrated everything. As you can see in teh video, everything reads OK and when I selected Save, it initialized the Tx. My suggestion is to create a new model and start over. Or, try to copy this model to a new model. Maybe that will work as well.

DX9 Cobra Stick Calibration - YouTube
 
Hi Tony and Keith , thanks guys I will try and set up new model would heli be better than plane to calibrate sticks or does it not matter ?
 
It shouldn't matter, but since it's a helicopter, you must use a helicopter model to fly the helicopter.

As stated, I had no issues with it. Which is why I suggest just copying your settings to a new model and trying it there, then if that doesn't work, just creating a brand new model and completely going over everything again. It's a pain, I know, but it works sometimes.

Hell, try this first. Just click both the back and clear buttons at the same time (while the Tx is on) and create a new model. Heli or plane doesnt' matter. Then without changing anything, go into the calibration menu and see if it works there.

Let me know.
 
Hi Tony No mate didnt work slider are bleeping when you move them, but still will not calibrate , its like they are not active , so how do I turn them on lol
 
Very interesting. I have to ask, you are going one click at a time, after taking them full right and left, to find center, right? I know, I know, but I had to ask lol.
 
Hi Tony may be i am not will try it again

- - - Updated - - -

Hi Tony I will kick my self now mate , it was due to me missing the centre mark , Thank you like I said be lost with out you
 
It's all good bro. Those sliders need a longer handle on them so that you can get a better feel for them. Always happy to help out!
 
Hi Tony one thing I found after I calibrated sticks the swash has gone out of level so will need to re-level the swash
 
You must log in or register to reply here.
Top Bottom