1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

Prop Installing A Propeller

Discussion in 'Airplanes' started by BCJ, Jul 2, 2018.

< Best Glue To Use . . . | Paint For Epo Foam >
  1. BCJ

    BCJ New Member

    Jul 1, 2017
    Likes Received:
    Trophy Points:
    New York
    does is matter which way an APC prop is installed? If there is a front and back , is the front the side that has the prop size imprinted on it?

  2. Tony

    Tony Administrator Staff Member

    Feb 21, 2011
    Likes Received:
    Trophy Points:
    Yes, it is very important. The correct way will give full thrust where reversed, you would be lucky to get 25% thrust. And yes, the numbers are printed on the front. They should always point towards the front of the plane or face up on a quad.
< Best Glue To Use . . . | Paint For Epo Foam >

Share This Page