D.O.G.
Goblin 380 Supporter
I have the Fat shark Transformer SE goggles and the Lumenier RX5GDR V2 VRX for a ground station. I have both of my quads on RaceBand Channel 8 using the Lumenier TX5G6R mini 600mW VTX. According to the chart, the frequency is 5917. The VRX is on Comp Auto CH 8 5917. I have the goggles on Video in 16:9 full view. Well the view in my goggles are no good for flying. The view shows whatever the camera is pointed at but it's also shows diagonal lines,3 but the lines are stationary. In theory it should work but it doesn't. From the VRX to the goggles I have 4 connections. 3.5 mm adapter, about 6" long, from the VRX to one end of the video cable. The other end of the video cable is connected to another video adapter about 6" long to a 3.5mm plug that goes to the goggles. I'm thinking to many freaking connections going from point A to point B lol. So I order a 15' 3.5mm to 3.5mm plug single video wire to eliminate the viewing problem I'm having. If that doesn't solve the problem can anyone suggest some kind of other idea to resolve my viewing problem
.