Articles
Thanks to TinyDeal.com, we now have the review of the Walkera Runner 250 up. In this review, I show what comes in the box, how to set it up, and how it flies the very first time. Until this video, I had never bound the Tx to the quad. And I have to say, I was quite surprised! Check out the video...
Here is a brand new quad to get people into the hobby. And best of all, it's only $17!! This is a ready to fly nano quad that they are calling the smallest quad in the world. And I have to say, this quad is small! But it flies really well. Check out the video and let me know what you think about...
It seems all we do now days is play with things that fly. Well, in this video, we get back to earth and play around with this little 1/12th scale Truggy. For a $33 vehicle, this thing is pretty sweet. Check out the product review video and let me know what you think! Once I get a track built, I...
Hey everyone, here is a little quad review from www.gearbest.com. I have to say, other than the jello in the video from the onboard camera, this is a great little quad copter. If you take the camera off, it will do flips and rolls, but can't do it with the camera attached. Have a watch and let...
Once you have mastered the RCH Trainer, it's time to move up to something that is a little more challenging. The RCH Edge 540 is just the ticket. This plane has a very low wing load, is very quick on the sticks, and can be made to fly very stable with the right settings. As always, if you have...
Here is the product review on the little OCDAY 180w, 16A charger that was sent to me Bsyexcellent over at Amazon. Click on the link in the description of the video to purchase this charger.
It only took 4 years, but I FINALLY did my first ever FPV flight! In this video, I install the 600mw 5.8Ghz VTX onto the 250 Quad as well as the FatShark camera. Sitting on my head is the FatShark Dominator V2's with the FatShark Module installed.
If you have any questions about the setup or...
The time has finally come, the build video is DONE! :yahoo:
In this video, I show you everything from what parts you get, to the CC3D basic setup, to the maiden flights. Yes, I said "flightS", and you will have to watch to find out why!
As always, if you have questions, comments or...
In this video, I show you how to install the Ikon Bluetooth Adapter! This is the best thing to come along since sliced bread!!!!
http://youtu.be/aKnWc6NI0K8
There are some people that just want to tinker with everything to get it "just right". I happen to be one of those people most times, but with the AR7200BX, I have to say, it's pretty solid right out of the initial setup. But for the rest of those that HAVE to have it perfect, there is the...
Since the digital pitch gauges have come out, I have noticed that some are having issues getting the pitch correctly setup on their helicopter. In this video, I show you how to properly calibrate and use a digital pitch gauge. Please post any questions, comments and/or suggestions in the...
In this video, I show you all how to go in and update your firmware on your AR7200BX. The process should be the same for the AR7300BX as well as on the original BeastX gyros.
You will need the USB link that is sold separately to update your firmware. You can purchase the USB link in the link...
In this video, I walk you through how to set up a basic airplane in the DX9. As always, if you have any questions, all you have to do is post below and we will help you out.
http://youtu.be/CcwGAS4xekk
For all of you new DX9 owners out there, as well as those that are looking into getting the DX9, here is the video on how to set up the Tx with basic Helicopter parameters. This video will walk you through the basics of getting that new bird up in the air.
As always, if you have any questions...
One of the most requested videos I have been asked for is "how do I parallel charge batteries". Well, the time has finally come and the video is here!
Ever since we posted the video showing us charging 9 3s batteries at 30 amps, people have asked how we could do that at such a high amp...
In this video, we revisit all of those letters on the front of a lipo pack. From the S Rating, to the C Rating, to MAH and even the P Rating that I have had so many questions about.
As always, if you want to see a specific video, all you have to do is post up and let us know. We will do all...
If there is one thing unique about computer transmitters, it's the ability to make them your own with your name, your backlight intensity, contrast and so on. In this video, I walk you through how to do just that as well as show you how to calibrate your sticks.
http://youtu.be/v6fdQeLlLr0
One of the first things you need to do with your new DX9 is update the firmware. If you don't, when you turn it on, and when you shut it off, it will give you a message telling you to register your DX9 and update the firmware. In this video, I show you step by step exactly how to do that.
Since selling off my DX8, I had to invest in a better Tx that will take me further into the future with this hobby, and the DX9 Black Edition was just the ticket!
This video was created by the request of a member. Once you know how to do this, and once you have your swash leveling tool, it will take you no more than 5 minutes to complete this setup. But just like pre flight inspections, this is a MUST DO after you crash or have to rebuild your servos...