General Tail servo Creep

[Heli 66]

While in HH mode, The servo seems to want to creep back to center but then stops short. Is there a adjustment for this, SUB TRIM???

 

[Tony]

You will get some creep in HH mode. If you want to center the tail blades, just flip it into rate mode for a second, then back into HH mode.

 

[Heli 66]

OK got it. Now, Gyro light blinks, I am not moving anything, i power everything on and step away as not to cause any movement. also HH 65 rate 35 initial settings

 

[Tony]

Blinking usually means you are not centered on the stick, or have put in some trim from when you plugged it in. Not sure if it's doing it from the git go.

 

[Heli 66]

I will double check everything, if i have more problems i'll ask some more questions. Thanks Tony for the help

 

[Tony]

Any time. Just let me know.

 

[coolgabsi]

Heli66 your stuff come in yet? Gotta get you in Air man!

Hey you got a canopy for your raptor? As tour fuselage is removed??

 

[Lee]

The blinking could be that the gyro is trying to initialise before the ESC. Then the gyro doesn't see any connection. Try unplugging the gyro from the RX, plug in the heli, let it initialise, then plug the gyro in. See if that works. If so thats the problem. I have had this on one gyro.