450 Swash Plate direction?

[Extensa]

Does anyone know if the swash plate on a T-Rex 450 Sport works in opposites so right Ail. stick input will tilt the swash to the left and forward on the stick will tilt swash back? or does it need reversing in the controller? and when I push the rudder either way the tail moves but does not centre when released, is this because of the Gyro? Thanks, Mike.

 

[murankar]

No. Forward stick should tilt the swash forward.

 

[Extensa]

OK thanks murankar, I thought the swash mix settings the builder sent me are back to front I'll switch them from - too + and vice versa

 

[coolgabsi]

or just reverse the channels. see if that helps..

i would reverse the aileron and elevator channel before I would touch the mixings. but if its unavoidable , it doesnt hurt..

 

[Extensa]

Ok I reversing the servo's in the reverse menu and the servo's went fully extended and made a straining noise :/ so I changed it back and changed ail. to +60 and elev. to -60 and now everything is working fine and swash is level jus need the rain to stop now lovely uk