General Servo Positions help

[Slobberdog]

Just thought I would post this up, I don't know what many people do when they are building their heli's but here's something I think is an easy way to now where the bundle of wire that go into your receiver come from, when I bult my 450 I put tags on each, but I think this looks a bit better,

After I decided where my servos best fitted in the airframe due to arm fit and centre points, I then had a black marker, starting at the aileron servo I marked it with on spot at the servo end the one spot at the plug end, then going around the others I did 2 spots 3 spots and 4 for the rudder,

Here's a couple of pics as they say they speak a thousand words,





I thought this was a simple clean way to know each wire when the little bundle needs to be plugged in,

Hope this helps some one, it was for me!

 

[pvolcko]

Nice. I've run into trouble sorting things out at the end of a build. Tug method to figure out what was what. I like this though. Could also go with color coding single dots if you had the colors. Nice tip!

 

[Slobberdog]

Thanks Paul, sometimes it's the simple ideas that can be good,