corsair_pilot
Member
Was setting up my Hk450pro, thought I had done it, minus working out gain settings, so I went out for my first spool up and see if I had done most of the set up right. First time the heli just wanted to pirouette even on the ground, I got some control, eventually gave up to work what I had done wrong. Worked out I had put the tail blades in backwards, so fixed that up checked a few other things n tried again.
Went out and it was doing the same thing! Checked servo direction again amd everything as it should be. It was then I noticed one of the tail blade grips working loose (after being loctited) and noticed that the shaft had also been bent. Would that still cause the thing to rotate like mad? Getting frustrated with this heli. Any hints and suggestions would be great. Have learnt heaps but now its driving me nuts!
Went out and it was doing the same thing! Checked servo direction again amd everything as it should be. It was then I noticed one of the tail blade grips working loose (after being loctited) and noticed that the shaft had also been bent. Would that still cause the thing to rotate like mad? Getting frustrated with this heli. Any hints and suggestions would be great. Have learnt heaps but now its driving me nuts!