Post Your Rc-help Trainer Pictures!!!

eekay

eekay

New Member
Today's the big day, this thing is going up, and coming down one way or another.

If I can wrangle a willing camera person hopefully I'll have video of that too.

Before I send her up, can anyone read over these Watt Meter specs and let me know if I'm overlooking anything bad?

Motor specs:
HK-010 WattMeter - D3536/8 1000KV
Batt: 3S 2200mAh 25C
Prop: 10x7
Max A: 30A
Max W: 430W
1160g Thrust

Watt Reader Readout (WOT@15Sec):
21.1Amp
11.23V
.102Ah
236.3W

Estimated Flying Time: 6.5Min


(Vids are upside down.....will have to fix that)

[video=youtube_share;SOy23aWD5fA]http://youtu.be/SOy23aWD5fA[/video]
 
eekay

eekay

New Member
image.jpg

Just got back from the maiden. It flies, oh boy does it fly. This thing is a rocket, but my controls were way off, and I crashed and burned. Waiting for the hot glue gun to heat up before heading out again.

MOMENTS AGO
[video=youtube_share;1PBy1XKZUmc]http://youtu.be/1PBy1XKZUmc[/video]

image.jpg
 
eekay

eekay

New Member
Round two, it flew almost perfectly. Stayed aloft for 5 minutes before low voltage alarm sounded, a result of voltage sag as when I landed I was still at 70% MAH remaining. Perhaps a change of prop, I have no idea how to correct it. Flew in a circle and botched the landing. It really needs landing gear. Have to make a new fuselage as its beaten to oblivion. Will get more footage next time.
 
Tony

Tony

Staff member
The 30 seconds that I saw it, it looked good. Remember, you don't have to fly this thing at 100% throttle. If you back it down for a bit, she will tame out and fly nice and smooth. The only thing you need to watch when flying slow is tip stalling. It cna also drop the tail if you are going too slow.

Otherwise, it looked great.

Now you know how it's going to handle so build your new fuse and have a blast. If you want an even faster plane, you can cut about 3" off the tips of the wings. I did this to Matt's plane and the thing is a rocket for being a trainer.
 
B

bsuvansh

Member
just completed my 2 rc-help trainer plane
i have put (3) 2mm carbon rods in the wing to maintain the dihedral's shape beacause late time i broked the wing due to rough runways
i have aslo used 4 plates to hold the motor mount in place is the motor was very heavy
and i have reversed the front landing gear because of this i have nice clearance to use a 13" pro
IMG_1976.jpgIMG_1959.jpgIMG_1959.jpgIMG_1961.jpgIMG_1962.jpgIMG_1963.jpgIMG_1964.jpgIMG_1965.jpgIMG_1966.jpgIMG_1967.jpgIMG_1968.jpgIMG_1969.jpgIMG_1970.jpgIMG_1971.jpgIMG_1972.jpgIMG_1973.jpgIMG_1974.jpgIMG_1975.jpgIMG_1976.jpg

- - - Updated - - -

and the landing gears are screwed into the the body

IMG_1976.jpg

IMG_1959.jpg

IMG_1961.jpg

IMG_1962.jpg

IMG_1963.jpg

IMG_1964.jpg

IMG_1965.jpg

IMG_1966.jpg

IMG_1967.jpg

IMG_1968.jpg

IMG_1969.jpg

IMG_1970.jpg

IMG_1971.jpg

IMG_1972.jpg

IMG_1973.jpg

IMG_1974.jpg

IMG_1975.jpg
 
B

bsuvansh

Member
i injoyed this plane while building it
i didnt used the middile kfm sheet this time
this is the test video of this plane
 
Last edited by a moderator:
B

bsuvansh

Member
this is my flight video
its not good but still u can c it flying and crashing
it was a windy day today and i couldnt control my plane and it crashed
the battery blew up
and motor was completely bended and was nothing left in the motor to reuse it these are the pictures of the damaged gear
IMG_1988.jpgIMG_1989.jpgIMG_1990.jpgIMG_1991.jpgIMG_1992.jpgIMG_1993.jpgIMG_1994.jpgIMG_1995.jpgIMG_1996.jpgIMG_1997.jpgIMG_1998.jpg

IMG_1988.jpg

IMG_1989.jpg

IMG_1990.jpg

IMG_1991.jpg

IMG_1992.jpg

IMG_1993.jpg

IMG_1994.jpg

IMG_1995.jpg

IMG_1996.jpg

IMG_1997.jpg

IMG_1998.jpg
 
Last edited by a moderator:
O

ozmo

New Member
5:46am started getting stuf wonky so gonna call it a night.

- - - Updated - - -

nyrods for internal servos. I added formers to hold the nyrods. ply LG block. Landing gear from stuff I got in a sale, fits well. Plastic spoon air scoops. Epoxy layup for the wings. one still in the clamps. Gonna use a motor I have in a Wild Hog. Should really SNORT:pride:

DSCN2256.jpg

DSCN2257.jpg
 
Tony

Tony

Staff member
There are two 12" cold cathodes inside the fuse. Then 46 LED's in the wing, all run off a 1000mah 3s lipo. I still have the wing in that picture, but the fuse is long gone.
 
You must log in or register to reply here.
Top Bottom