Helo members i used tonys pitch guide from u tube, but my problem is that when i go full up with the stick i get + 10 degres in idle up 0 at half but all the way down i get -13 or more and the swash is on the frame. But when i take it out of idle up it goes up to a normal height. If i try to raise the swash at half stick not enought threads on servo links or on there by one thread. swash setings at 60 everything is right execpet stick down at idle up. No sub trims futaba 6exhp old transmiter. copter ae v2 . Any thoughts from members or tony.