Servos Mixing Digital/Analog Servos same Rx

[totoheat]

Hello

I need to use Throttle servo Hitec 85MG where rest are Standard digitals servos 2 Align and 2 Savox ,is this may cause any sort of issues? am using Spektrum Rx 7610 and Tx Dx9
When I bound Tx to Rx by default Frame rate is 11ms
I understand that Servo its were this Digital/Analog conversion take place but am not sure if this frame rate 11ms can damage Th servo

Thanks for all help

 

[Tony]

It's not the frame rate that can damage the servo, it's the centering position. And if you are not using a 3 axis gyro, then you shouldn't have anything to worry about. However, if you are, then I would use digital. And if you are using any kind of governor, then you must use digital on the throttle. But if this is in a plane, then no worries.

 

[totoheat]

Tony

Thanks,forgot to mention that they are in a Plane
I have tried to get a digital micro servo for Throttle but there is not much space on fuse of profile and standard was to much
so thanks