450 Microbeast V5 Bench Vibration Test

T

transpro61181

Member
I have a 470LM with a Microbeast V5 with attitude control. I recall reading in the past that the Microbeast has the ability to do a vibration test on the bench (blades off) and give feedback on the A-N led lights on the unit as to how much vibration is present. For the life of me cannot relocate that information online and the V5 manual on wiki has no mention of it. Does anyone know?Thanks!
 
I have never heard of this feature. As long as your blades are balanced, your shafts are straight and nothing is damaged, there shouldn't be any vibration.
 
I’ve never heard of that either.. as long as the blades are balanced and the shafts are straight there should be no vibrations.. adding a second piece of double-sided tape under the Microbeast would help but not necessary..
 
Just be careful with more tape. The only time I suggest more tape is on a nitro.

My vibration analyzer is the tail fin. If it looks blurry then check your heli over.
 
transpro61181 said:
I have a 470LM with a Microbeast V5 with attitude control. I recall reading in the past that the Microbeast has the ability to do a vibration test on the bench (blades off) and give feedback on the A-N led lights on the unit as to how much vibration is present. For the life of me cannot relocate that information online and the V5 manual on wiki has no mention of it. Does anyone know?Thanks!
Click to expand...

I found this but not sure if this will help you Usage of AttitudeControl (optional) - BEASTX Wiki
 
I believe you do a vibration analysis in the studioX app. I remember seeing it in there but never clicked on it. You would need the USB2SYS/BLE2SYS interface thingie....
 
You must log in or register to reply here.
Top Bottom