Hi, like ive said before I don't know a lot about rc electronics but im trying to learn as much as i can before I ask this questions but i havent been able to work this one out i even asked hobbyking directly but they tell me they don't know about the Dx4e, first of all i bought some things for my first boat so I don't have anything else to test thing on. I know the ESC and motor work so:
first and most important question.
Can i use this transmitter for a boat? the left stick has no spring its a mode 2/4 model from a supercub
If that's a yes (i really hope it is) please continue reading
So I bought for my boat:
hobbyking 50A esc w/program card
turnigy 2842-2800KV motor
orange R618-XL 6ch receiver
I had:
spektrum dx4e
11.1V 1300mAh LiPo
servos
a. I connected the receiver and bind it to the tx without a problem
b. I can control servos on any channel BUT NOT in the throttle ch
c. the Esc doesn´t even arm on the thro ch
thanks in advance guys
best regards
Jake
first and most important question.
Can i use this transmitter for a boat? the left stick has no spring its a mode 2/4 model from a supercub
If that's a yes (i really hope it is) please continue reading
So I bought for my boat:
hobbyking 50A esc w/program card
turnigy 2842-2800KV motor
orange R618-XL 6ch receiver
I had:
spektrum dx4e
11.1V 1300mAh LiPo
servos
a. I connected the receiver and bind it to the tx without a problem
b. I can control servos on any channel BUT NOT in the throttle ch
c. the Esc doesn´t even arm on the thro ch
thanks in advance guys
best regards
Jake