1. If you would like to get rid of these banners and the ads within the posts, all you have to do is sign up and they will go away!
  2. Welcome to Rc-Help, are you here looking for the PDF Plans? They are located in the store in the tab above, but you must be signed in to access that part of the site. It only takes a second to sign up!
  3. Like Us On Facebook!
    Hello Guest, it occurred to us during that last server failure that we had no way of informing the members of the site of the failure and I would like to invite you to like us on facebook so that you can get updates if the site happens to go down again. We don't post much over there unless we are updating the members so we will not flood your feed like some places do. Just click on Like and then allow notifications and that's it. See you there soon!

    Click Here To Rc-Help's Facebook page!
    Dismiss Notice
Dismiss Notice
Hey Guest, I see you are not signed up on our forum yet. Did you know Registration is FREE and is only a couple clicks away? You can even sign in from Facebook, Twitter or Google+ for your convenience! So what are you waiting for, CLICK HERE to join in on the conversation!

Spektrum DX8 Flaps Programming

Discussion in 'Transmitters & Receivers' started by Confuqua, Mar 27, 2017.

< New Spektrum transmitters: DX20 and DX8 gen2 | Turnigy 9x Transmitter. Where are all the compatible receivers!!!! >
  1. Confuqua

    Confuqua New Member

    Blog Posts:
    0
    Joined:
    Mar 27, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Gender:
    Male
    Location:
    Tucson, AZ
    Newbie question...... Is there something somewhere that explains (for dummies) the process of setting up 2 flaps with 2 servos and using two channels. I know (I think) that each servo is assigned to its own channel, and that the channels have to be mixed, but I get totally lost trying to set it up.

    Looking forward to some expert "help".
     


  2. Tony

    Tony Administrator Staff Member

    Blog Posts:
    14
    Joined:
    Feb 21, 2011
    Messages:
    35,494
    Likes Received:
    1,391
    Trophy Points:
    113
    When you are setting up your DX8, there is a menu type called Wing Type. In there, you can set if you want single or dual aileron and single or dual flaps. There is also other options, but what you are looking for is 2 aileron and 2 flap. Hope this helps.
     
< New Spektrum transmitters: DX20 and DX8 gen2 | Turnigy 9x Transmitter. Where are all the compatible receivers!!!! >

Share This Page