Fastfreddie
Member
I bought a used rtf trex 150x and when I received it the settings were set to very mild so I used the iPhone app and made some adjustments to make it more responsive but now in idle up I have a dead zone.
In normal mode I have full swash movement but when I switch to idle up and give it full negative pitch the swashplate doesn’t go all the way down and I can move the stick somewhere around 1/4 “ from full negative towards pos until the swash moves.
I’ve tried adjusting the servo range from 100 to 120 nothing happens. I am using the align a10 tx and have a linear Pitch curve on idle up.
In normal mode I have full swash movement but when I switch to idle up and give it full negative pitch the swashplate doesn’t go all the way down and I can move the stick somewhere around 1/4 “ from full negative towards pos until the swash moves.
I’ve tried adjusting the servo range from 100 to 120 nothing happens. I am using the align a10 tx and have a linear Pitch curve on idle up.