Reply to thread

Message

<blockquote data-quote="coolgabsi" data-source="post: 29596" data-attributes="member: 22">Yeah ... Don't worry too much about that light. I have the exact geometry finally after 6 months of trying it. It's great that you want to set it up the right way. But if you are .5 degrees off and have a blinking light, you shouldn't have an issue. Instead of servo horns change the swash balls to longer or shorter as needed. Funny cause align people had to use jr swash balls. They are longerServo horns won't make a difference anywaz bro if the distance between the holes is what jr manual recommends.. If your modified horns are shorter or longer in anyway..&nbsp; Only then ill recommend changing them. If they are spot on then aligns will need to have the same distance too and that'll just bring you back to square 1 <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" /> As far as 625 are concerned. You really still won't run into your tail blades bro. I have people here running that setups. And they are perfectly fine and they do hardcore 3D... One guy who just sold his nex8 had that setup with radixes too. Seen the goblin? Seen how its blades are crazy close? <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f609.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=";)" title="Wink&nbsp; &nbsp; ;)"&nbsp; data-smilie="2"data-shortname=";)" /> it'll be just fine! <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" /> Fly safe!! <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" /> have fun!</blockquote>

[QUOTE="coolgabsi, post: 29596, member: 22"] Yeah ... Don't worry too much about that light. I have the exact geometry finally after 6 months of trying it. It's great that you want to set it up the right way. But if you are .5 degrees off and have a blinking light, you shouldn't have an issue. Instead of servo horns change the swash balls to longer or shorter as needed. Funny cause align people had to use jr swash balls. They are longer Servo horns won't make a difference anywaz bro if the distance between the holes is what jr manual recommends.. If your modified horns are shorter or longer in anyway.. Only then ill recommend changing them. If they are spot on then aligns will need to have the same distance too and that'll just bring you back to square 1 ;) As far as 625 are concerned. You really still won't run into your tail blades bro. I have people here running that setups. And they are perfectly fine and they do hardcore 3D... One guy who just sold his nex8 had that setup with radixes too. Seen the goblin? Seen how its blades are crazy close? ;) it'll be just fine! :) Fly safe!! :) have fun! [/QUOTE]

Verification