Micro Blade mSR DX6i Settings

Tony

Staff member
Hey everyone, as a request from coolgabsi, I am posting my settings for my mSR. I have to say, some don't like this heli after getting into collective pitch heli's, but I still love mine and fly it all the time.

If there is something that I may have missed, or you just want to know, please post it in this thread and I will make the corrections to it. Also, please feel free to post up your settings to your mSR. If you think it will work better, I will grab a battery and give it a shot and let you know what I think about it.

Model Type
Heli

Reverse
THRO-N
ELEC-N
GYRO-N
AILE-N
RUDD-N
PITC-N

Swash Type
1 Servo 90

Timer
4:30

ADJUST LIST

D/R & Expo
0-AILE 100% 35%
0-ELEV 100% 35%
0-RUDD 100% 35%
1-AILE 50% 35%
1-ELEV 50% 35%
1-RUDD 75% 35%

Travel Adj
THRO 100%
ELEV 125%
GYRO 100%
AILE 125%
RUDD 125%
PITC 125% (stock is 75%)

Thro Curve
NORM 0% 25% 50% 75% 100%
STUNT NOT USED
HOLD 0% 0% 0% 0% 0%

Pitc Curve
NOT USED
 
u dont use mixes???apparently its supposed to have better performance with mixes... it comes with inbuilt mixing.. but if u counter it to have none somehow.. it gets better.. so .. please let me know what u think about it.. :)
 
You will have to link me to what you are talking about. The settings that I posted are working really well for me. I can go hands off for a long time with these settings, but it's also very responsive at teh same time.
 
Thank you Tony...I have one that never could use, is totally crazy !!!!
I will try it tomorrow with your settings and told you what happened.
 
Tony when you say 125% pitc (stock is 75%) is that set both throttle up and down at 125% or throttle up 125% and throttle down set to 75%? and when you say pitc curve not used do I set to 0% for L 2 3 4 H? Thanks, Mike.
 
Technically none of that matters since you can't adjust the pitch on the mSR. It's on the Single Servo 90º and is fixed pitch. I'm not sure why I put my pitch at 125%. It's been a while since I wrote this lol.
 
I would make sure the tail motor is still good, your blades are not flat, and you have NO trim or sub trim in the rudder.
 
Top Bottom