Members of the forum I need help.
Items on hand;
Align Trex 450 PRO DFC SUPER COMB with 3GX
Spektrum DX8 with AR8000 plus TM1000 with Sat and the sensors.
Align LiPo 11.1v 2200mAh 24.4Wh 30C
Venom Pro Charger
Phoenix R/C 4 Flight Simulation
I purchased 3 weeks ago new in the box Align 450 Pro DFC Super Combo. Read the instructions several times and watched all build's on You Tube.
Everything went together with no problems. Now I'm at the servo setting and adjustment phase.
I turn the power on and nothing happens.
I checked all the connections, checked battery for proper charge, and checked the wires attached to the 3GX for proper polarity and placement.
Still no power, none of the LED light turn on, No status, No Gov. indicator, and none of the 5 setup LED indicators.
I removed the electricals and then checked for broken wires with my Fluke, all appear to be okay. I'm also unable to bind.
I rewired the heli using the Spektrum AR8000 I have power and was able to bind and the servos work.
Am I missing a on/off switch some place on the 3GX or is it dead from the factory??
Thank You in advance for any help and advice,
Michael
Items on hand;
Align Trex 450 PRO DFC SUPER COMB with 3GX
Spektrum DX8 with AR8000 plus TM1000 with Sat and the sensors.
Align LiPo 11.1v 2200mAh 24.4Wh 30C
Venom Pro Charger
Phoenix R/C 4 Flight Simulation
I purchased 3 weeks ago new in the box Align 450 Pro DFC Super Combo. Read the instructions several times and watched all build's on You Tube.
Everything went together with no problems. Now I'm at the servo setting and adjustment phase.
I turn the power on and nothing happens.
I checked all the connections, checked battery for proper charge, and checked the wires attached to the 3GX for proper polarity and placement.
Still no power, none of the LED light turn on, No status, No Gov. indicator, and none of the 5 setup LED indicators.
I removed the electricals and then checked for broken wires with my Fluke, all appear to be okay. I'm also unable to bind.
I rewired the heli using the Spektrum AR8000 I have power and was able to bind and the servos work.
Am I missing a on/off switch some place on the 3GX or is it dead from the factory??
Thank You in advance for any help and advice,
Michael