Just want to make sure that I have this right before final wiring.
· External power into batt/bind port of 3GX
· Batt port out on 3GX to Aux 3 on AR8000
· Bind/data port out on the AR8000 to the TM1000
Will this work & my understanding with this setup not/never hook satellites to the 3GX unit.
This is going on a T-Rex 700 & the reason was to have an open channel to activate a switch to open bay doors on a box that will be mounted on the underside of the body between the skids. The box will be used firstly to spread some of my dad’s ashes in remote wilderness area as requested (by air only). After that it will be used for a flyby dumping such items as confetti or colored sparkles.
All my other DFC helis are only using 2 satellites only off the 3GX.
Thanks for looking!
Pete
· External power into batt/bind port of 3GX
· Batt port out on 3GX to Aux 3 on AR8000
· Bind/data port out on the AR8000 to the TM1000
Will this work & my understanding with this setup not/never hook satellites to the 3GX unit.
This is going on a T-Rex 700 & the reason was to have an open channel to activate a switch to open bay doors on a box that will be mounted on the underside of the body between the skids. The box will be used firstly to spread some of my dad’s ashes in remote wilderness area as requested (by air only). After that it will be used for a flyby dumping such items as confetti or colored sparkles.
All my other DFC helis are only using 2 satellites only off the 3GX.
Thanks for looking!
Pete
Sorry for your loss, I lost my Dad when I was 16