motor

I bought an align Trex 300x just before Christmas and have been doing some great flying. Just over a week ago I was practicing inverted flight and crashed from about 3' off the ground. (lost orientation) I repaired all the mechanical aspects of the the heli, but when I went to test fly last...

Hi Peeps! I am currently converting my old T-maxx 3.3 to electric. Today I got it running but burnt my ESC after 10 minutes. I wonder why. Maybe someone here can shed some light on it since i am a newb in RC building... I am running a 3900KV 4pole motor with a 60A ESC (Now deciesed.) I had a...

Hey I know this forum is for the RC guys but since both the vehicles are electric they have similarities that can be drawn from one another. So i posted this on an EV forum but haven't got a reply so I was thinking of just pasting it here. Hello all, I am making an electric motorcycle and I...

Hi All, I ordered some rockstar race motors 2204 2300kv off of banggood and have only just got a chance to test them. I have a video of the issue in the video it can be seen that when I put the throttle fully on the motor does not kick in correctly and if i take the throttle off and back on...

Hi guys, I'm new here so bear with me if I come across as a total noob! I'm a cameraman by trade and have ventured into the world of aerial video. I bought a nice simple 450 quad to get to grips with multirotor flying. I seem to have got the hang of it so far. I had a pretty bad crash...

I have a DJI F450 that I want to upgrade, I have seen someone with similar motor/prop set-up and runs amazing. Basically 4 new motors (ARK RC - Not Found http://arkrc.com.au/products/SCII2215%252d1810kv-Scorpion-SII%252d2215%252d1810KV-%28V2%29.html"]link here[/URL]) each has a Max Continuous...

I have a hb 2835 brushless motor and a 450 clone. I had a motor problem (I grinded shaft to much to adj. teeth). So i Bought the 2835 brand new. All 3 wires coming off motor were all black. And needed me to put ends on wires. I read somewhere that it don't matter which wire goes to which. But...

I am using a old erazor 450 motor in my clone, and I have to place a spacer to lower motor just enough to line up the pinion gears with the flywheel. I am tired of every time I spool it up the motor moves, or it strips the gears. I want to fix this one or put another in it. There is only a small...

Hi Guys, I am wanting to hear if any Blade mSR X owners have had problems with the main motor. I have probably done some 20 flights with my mSR X and now the motor heating up to tempeartures that make it too hot to hold with your fingers. The motor cooks within 30 seconds, looses all...