Search results

Also remember that the throttle hold switch starts the blades spinning on quads( I sliced my finger pretty good and learned that the hard way)

Spektrum has setups that you can load onto a sd card for the 110 I worked for my old dx8. I can’t ever get the manual setups to work either.... here is the link for whatever reason I have to use a pc to get the site to work it won’t work on my phone Setups for your Spektrum Radio: Spektrum -...

And like a crazy helicopter wizard you fixed it from the internet..... the amount of wizardry in you brain is amazing. I know this was a fairly simple fix but I wonder why the new parts changed the direction of the pitch it was pretty much a one for one swap plastic to aluminum and I didn’t even...

It’s the ar7210bx but yes I’m fairly certain it’s as simple and going into the correct menu and changing the red light to blue Thanks again for your help tony you always are very helpful!

Ok so the rotation checks out but when I push the tail to the right the trailing edge of the blades tilt inward towards the boom .....that’s the wrong way right?

Alright ,tail sensor direction is still normal (red) the settings I messed where tail dynamic and gain I didn’t touch anything else. And to clarify what it does it doesn’t even get up to idle speed before I have to hit the hold switch to keep it from tipping over from spinning on the ground...

Ok so I messed with a bunch of settings and then decided to replace the entire rear tail system with the aluminum ones from micro Heli and now I have a tail that is completely uncontrollable it just spins with the main rotor! I’m thinking my tail Servo is junk what do you guys think?

Thanks I’ll give that a shot

just bought this shiny new blade TRIO 360cfx and first flight outta the box it has constant tail wag I’d say about five degrees in both directions. I’ve adjusted the gain and it did very little. I’ve checked blade tracking and they are pretty dog on close . I’ve looked for bends in the boom and...

Yep zero at mid stick +12 at stick full up zero at stick full down

This is On a tree 550e with a gen1 dx8 Alright so I go my handy pitch gauge and I have all my rods leveled and good i can get zero pitch and positive 12 pitch but it won’t go into negative pitch! I’m thinking it might be my pitch curve but my other flybarless helis (all made by blade) have a...

Sorry I should have specified this is a blade Scimitar 215 so a quad copter not a flying wing

Anyone got a setup for a gen 1 dx8 flying a scimitar 215 the setup in the book doesn’t work and I managed to slice my finger open pretty horrible using those settings (I know I should have setup with the blades off believe me I learned my lesson) if it won’t work with the old transmitter I have...

Ok in your video you hit 100 both ways on all channels I hit 100 on no channels how do I fix that on the dx8 gen 1? I’m set up on Heli with three servos 120 degrees also it moves multiple channels with one stick movement do i Change this in the fbl or the radio?

Ok so I have throttle curves and pitch curves loaded in my radio is that gonna mess throngs up ? Without those I wasn’t getting full control stick throws on the one screen of the ikon software.

hey guys I’m trying to set up the servo horns on this align 550 with a ikon 2 are all servos considered neutral with all sticks centered? Or do I need the left stick at the lowest setting? Thanks in advance for all the help, Jeff

Disregard I figured it out

Does the polarity of the servo wires matter I can’t find any info on this? Also direction of the mounting for the ikon2 is it micro USB port forward if I’m mounting on the top behind the awash?

Yep it uses 6s packs

Ok so with the align 550 I should go with the hd and add a 2 cell battery? Where do you mount the extra battery and what does that battery do, does it keep constant power to the gyro? I’m fairly certain a BEC is built into bl70g so would this be a valued upgrade?