Spektrum Wireless trainer Bind Fail

dazacx2

Member
Hello all,
Want to set up a training transmitter with wireless from dx 9 to dx 6 i every time i try it said bind fail and the dx6i keeps binding but never connects.
I tried with a black 6 and that said it connected but my 9 said fail and it would have no signal on master TX.

i have tried a old model and new model on my dx9 and new model on 6i and still no bind.

Any ideas on why its not binding?

Daza
 

holtneil

Active Member
Hi mate last time i did this on my dx9 to dx6i
I set up the model in the DX9 and the same in the DX6i then bound the 2 transmitters with out the heli being powered up you will need to tell the DX9 what the DX6i will be allowed to control ie throttle , cyclic etc , once this is right you can then power up heli with the DX9 bound to the heli turn on the Dx6i then as you pas control over the dx6i should have the control you set it to have , to be safe pull the motors wires untill you know its right
 

Tony

Staff member
Yup, as long as you have the DX9 (or any airware Spektrum Tx with wireless trainer function), you can do wireless training with any spektrum Tx out there that is on the same frequency (DSM2 if you are in USA, and DSMX everywhere). I have never tried the wireless trainer, but I guess I need to start playing with it.
 

Eggy 71

Member
I used this feature today to introduce my daughter to flying helis. It worked GREAT. I bound my old Dx6i to my Dx9 and to a 230s. A good first heli with not too much power for a first timer. Setting up with instant instructor override works best. It gives a newbie the confidence that they need to know the instructor can save it if things go astray. As she lost reference or control I just levelled out in a hover and gave her back control. She was quite nervous of crashing but as confidence grew so did the skill and enjoyment. I think it would be a great setup for any beginner / intermediate trying a new model for the first time. It will save big $$$ for just a minor error flying the big helis for a first time . I wish I had it for my first Trex 550 flight.
 

Tony

Staff member
That is awesome that your little girl is interested in these as well. Mine, not so much lmao.
 
Top Bottom