Articles by Tony
In this video, we take a complete truck, and tear it down into it's individual components. From removing the shock towers to removing the transmission, it is all coming off of the chassis!
As always, if you have any questions, comments or suggestions, post them below in the comments section.
In this video, we tear into the front and rear diff's (differentials) to completely clean them, rebuild them and get them ready for some ground pounding action. As you can see in the video below, these are some of the worst gears I have ever seen. I never thought grease could get this hard...
In this video, I tear into the transmission to show you what to look for when going through your truck.
As always, if you have any questions, comments or suggestions, post them in the comment section below.
We have completely torn down this truck and cleaned it from front to back, top to bottom and now it's time to put it all back together in all its monster truck glory!
As always, if you have any questions, comments or suggestions, post them below in the comments section.
In this video, I finally get the T-Maxx running again the way it should and we take it out for a little test drive.
As always, if you have any questions, comments or suggestions, post them in the comments below!
In this video, I walk you through how to completely set up the suspension on the Traxxas T-Maxx. I show you how to adjust the camber as well as how to modify an RPM Camber Gauge so you can use it on large tires. I also show you how to use an RPM Toe In Gauge to set the toe-in on the front and...
February 1st, 2013 was the last time the RCH Heli, AKA Murphy, the Align 600 Nitro, was put into a public video. Well today, that changes!
In this video, I catch you up on what has went on with the bird, why it has set so long and what we are planning to do with it in the future.
If you...
Thanks to TinyDeal.com, we now have the review of the Walkera Runner 250 up. In this review, I show what comes in the box, how to set it up, and how it flies the very first time. Until this video, I had never bound the Tx to the quad. And I have to say, I was quite surprised! Check out the video...
Here is a brand new quad to get people into the hobby. And best of all, it's only $17!! This is a ready to fly nano quad that they are calling the smallest quad in the world. And I have to say, this quad is small! But it flies really well. Check out the video and let me know what you think about...
It seems all we do now days is play with things that fly. Well, in this video, we get back to earth and play around with this little 1/12th scale Truggy. For a $33 vehicle, this thing is pretty sweet. Check out the product review video and let me know what you think! Once I get a track built, I...
Hey everyone, here is a little quad review from www.gearbest.com. I have to say, other than the jello in the video from the onboard camera, this is a great little quad copter. If you take the camera off, it will do flips and rolls, but can't do it with the camera attached. Have a watch and let...
Once you have mastered the RCH Trainer, it's time to move up to something that is a little more challenging. The RCH Edge 540 is just the ticket. This plane has a very low wing load, is very quick on the sticks, and can be made to fly very stable with the right settings. As always, if you have...
Here is the product review on the little OCDAY 180w, 16A charger that was sent to me Bsyexcellent over at Amazon. Click on the link in the description of the video to purchase this charger.
It only took 4 years, but I FINALLY did my first ever FPV flight! In this video, I install the 600mw 5.8Ghz VTX onto the 250 Quad as well as the FatShark camera. Sitting on my head is the FatShark Dominator V2's with the FatShark Module installed.
If you have any questions about the setup or...
The time has finally come, the build video is DONE! :yahoo:
In this video, I show you everything from what parts you get, to the CC3D basic setup, to the maiden flights. Yes, I said "flightS", and you will have to watch to find out why!
As always, if you have questions, comments or...
In this video, I show you how to install the Ikon Bluetooth Adapter! This is the best thing to come along since sliced bread!!!!
http://youtu.be/aKnWc6NI0K8
There are some people that just want to tinker with everything to get it "just right". I happen to be one of those people most times, but with the AR7200BX, I have to say, it's pretty solid right out of the initial setup. But for the rest of those that HAVE to have it perfect, there is the...
Since the digital pitch gauges have come out, I have noticed that some are having issues getting the pitch correctly setup on their helicopter. In this video, I show you how to properly calibrate and use a digital pitch gauge. Please post any questions, comments and/or suggestions in the...
In this video, I show you all how to go in and update your firmware on your AR7200BX. The process should be the same for the AR7300BX as well as on the original BeastX gyros.
You will need the USB link that is sold separately to update your firmware. You can purchase the USB link in the link...
In this video, I walk you through how to set up a basic airplane in the DX9. As always, if you have any questions, all you have to do is post below and we will help you out.
http://youtu.be/CcwGAS4xekk