Articles by Tony
In this video, I show you some of the many features of the SJ Cam SJ5000X action camera. In my opinion, this is one of the best mid level action cameras that you can get. The image quality with the Sony sensor is fantastic, the Gyro stabilization works quite well and it is very easy to use. Have...
In this video, I show you how to do everything from program the transmitter (in my case, a DX9) to the maiden flight switching through all of the different flight modes.
Setup of the CC3D is very easy thanks to the Setup Wizard. Just follow along and you will have your CC3D in the air in no...
GoolRc 210mm Racing Quad. In this video I show you what you get with the basic package. If you have seen my 250 videos, this 210 quad has bigger motors on it than the 250. This should prove to be a lot of fun. Also, this 210 comes with a CC3D flight controller that everyone knows.
One down side...
I decided to go ahead and upload this video while I'm working out the issues with the video quality I'm receiving through the camera. I'm not sure if it's my camera, my wires going to the VTX or the cables coming from my VRX to my goggles, but I'm working on it.
In this video, I do a little...
I was given an opportunity to review a little FPV camera and I jumped on it. What I didn't expect is what I received. This has to be one of the best little cameras I have ever tried. It is a CCD camera, mine is IR Sensitive so it will do much better in low light and will even work in the pitch...
I have had enough of not being in FPV! So I ordered the cheapest goggles that I possibly could, and that is the Quantum V2 Pro goggles. At $36 you can't beat it. Unfortunately, at the time of the order they were out here in the states and I had to order it from china where shipping was over...
The Eachine TS835 Video Transmitter is a fantastic transmitter for the price. But it does have some downfalls. For the good, it's powerful, great signal strength and works well in the trees. The downside of this VTX is the output voltage for the Video Camera is only 4.92 volts and most cameras...
Time and time again I hear people that are worried about soldering those pins on the flight control boards. In this video, I show you just how easy it really is to solder those pins. It takes all of about 5 minutes (10 if you have never done it before) and if you follow what I show in this...
After a few members told me about these servos, I hit up Jason over at Banggood to see if I could get my hands on them. He agreed and sent them to me. In the video below, I explain the servos which are already installed in my SE V2. If it could have gone wrong, it did go wrong on this video...
I thought I would go ahead and post this here since we can use this just like the 6 port charger that I reviewed a while back. Except this time, you can charge your stuff in your car instead of having to have AC power. Have a watch. It's a short video.
Click this link to get yours today...
Had this sent to me from Anglink and I have to say, this is going to be a big help in charging multiple packs for the little quads that have USB only chargers. Have a watch and let me know what you think.
AngLink 50W 6 Port Desktop USB Charger Review - YouTube
Banggood sent me a little hex and I had to get it up in the air. Unfortunately, it was quite windy outside today but that didn't stop me from getting this hex in the air.
When you order this hex, you are going to have to install the sticks into the Tx as well as 3 AA batteries. You are also...
Forgot to upload this last night. This is what is being called the worlds smallest hexacopter! and if flies like a larger hex. Very easy to fly, very stable and has a SICK piro rate in high rates. Best of all, it's cheap! Click on the link below to check it out on Banggood's site.
Fayee...
This is the longest it has ever taken to do a review video and I have to say, it was worth the wait. I have read multiple reviews of this quad and I heard everything from it's WiFi on the FPV (which it's NOT) and it doesn't handle ANY wind (which it does). Well, I put it all to the test in the...
It has taken me way too long to get this done, but here it is. And I have to say, this hex is a mean little thing. Watch the video to see it attack me! Friggin thing hahaha.
WLtoys Q272 Hexacopter Drone Product Review - YouTube
I was pretty excited to get this balancer in the mail. I have been wanting one like this for quite some time now. But never wanted to drop the coinage on it. Now that I have used it, I'm kicking myself for waiting! This balancer can do just about anything from props, to entire helicopter heads...
If you are looking to get into any hobby, most likely you are going to look for some good deals on used products. In this video, I show you what you are more than likely going to get.
I purchased both of these trucks for a really good deal and I couldn't pass it up. Such a good deal as a...
In this video, I show you how to completely tear down the engine out of your Traxxas T-Maxx. This is not as hard as some would like you to think. We start by pulling the engine out of the truck, followed by removing the ez start then removing the backplate, sleeve, piston & rod and crank after...
In this video, I finally got all of my parts in for the new engine including a new engine block since my last one was broke. I also show you how to get rid of light rust on the crank from sitting. Remember, the fuel these use is made up of mainly methanol, and methanol absorbs water, then the...
In this video, I show you how to properly tear down and rebuild all 8 of the shocks on a Traxxas T-Maxx. Once you are done rebuilding your shocks, your truck will ride better than ever!
As always, if you have any questions, comments or suggestions, post them in the comment section below.