Karubah
Member
Installed new DFC main shaft, centred servos, installed and levelled DFC swash. I followed Marius,s guide in setting up DFC head. So hears the problem I can get up to 14.5 deg pos pitch and only 4.6 neg pitch . The servo linkages are as short as they can go and so are the head linkages. It,s as if the main shaft is to short. Any ideas from the brains trust out in cyber world? Cheers Andy
- - - Updated - - -
PS. Had job to get 0 pitch at mid stick machanicaly.
- - - Updated - - -
PS. Had job to get 0 pitch at mid stick machanicaly.