Harford
Active Member
I am increasingly making use of the telemetry capability of my DX9 with now 3 of my machines able to provide data - my interest at this stage is restricted to flight pack voltage.
However I am a little unsure of the minimum and maximum voltage values I should enter in the Flight Pack Voltage screen. If for example I am using a 3S lipo is this always going to be something like :
Volts Min - 11.1v _ie 3 x 3.7v
Volts Max - 12.6v - ie 3 x 4.2v
or am I completely missing the point ?
Also, what happens if the reading is outside these values - other than a warning from the Tx.
Many thanks for any enlightenment on what is probably another inept question.
However I am a little unsure of the minimum and maximum voltage values I should enter in the Flight Pack Voltage screen. If for example I am using a 3S lipo is this always going to be something like :
Volts Min - 11.1v _ie 3 x 3.7v
Volts Max - 12.6v - ie 3 x 4.2v
or am I completely missing the point ?
Also, what happens if the reading is outside these values - other than a warning from the Tx.
Many thanks for any enlightenment on what is probably another inept question.