Hey Guys, I got a problem with my swashplate tilting as I go full collective. I have a EXI 450 with two servos mounted in the front and the third mounted in the rear.Seems as I go from center servo position to full collective the swash wants to tilt as it rises.Almost like one of the servos in the front is moving at a different rate than the other side, the back servo looks ok as the swash is not tilting from front to back but from side to side.I tried messing with the end points but that really is not the problem.I have another EXI the same as this one with all the same servos and this one works fine all servos move at the same rate.Can aneyone shed some light on this problem.
Thanks Joe
Thanks Joe