jaystinson@yahoo.com
New Member
I just finished my build of an Align Trex 450. Flybarless with 3gx version 4.0 Dominator motor BL460mx ESC BL45x DS 416 digital servos with two spektrum 9645 sats. Spektrum DX8 TX with standard settings with no mixing. I set my esc to Brake disabled. Mid Timing, High cutoff for battery protection, Aircraft set to Heli 1, Throttle response is set to quick and the voltage is set to 5.5v. Amped up battery 2200 mAh 20C brand new never been over drained and this is occurring with a full charge. On spool up in normal flight mode it starts normal. I swith to flight mode 1 and the heli stops. If I start in flight mode 1 it starts up normal. But then quits. It seems that when I give another command other than throttle the motor shuts down. I have to reset the flight mode switch to normal and return the collective back to zero. Then it starts back up no problem. Anybody got any ideas. Thanks