holtneil
Active Member
Version 2.0.0 was released!
We have achieved another milestone in the development! Version 2 arrived right now with a major bunch of news and improvements.
The update is available right now for everyone!
Major configuration improvements:
The Setup Wizard was redesigned to be perfectly simple and straightforward.
Parameters such as Pirouette Optimization and Sensor Compensations are past.
Directions of the Rescue collective pitch and Revomix are preconfigured automatically.
Spirit know a default transmitter reverses and travel ranges of a famous brands.
Channel deflections in the Diagnostic tab are based on the real sticks movement.
Parameter Position has 8 independent mounting options.
Servo reverses and Swashplate were extended.
Governor:
Algorithms were completely redesigned to improve the reaction time.
Throttle Range has a new units [microseconds] (see ESC specification).
RPM changing is significantly faster now.
Autorotation Bailout has no limitations now. (Activated with TC 12% and more)
Better immunity for a RPM sensor noise.
New parameter called Spoolup rampup for the smoothest spoolup start.
Stabilisation:
All stabilisation modes were improved to be even more useful.
Stabilisation (Acro) allow to perform even more acrobatics with aid.
New Stabilisation (Scale) for a scale flying simulation.
New kind of stabilisation called Coaxial for coaxial-like flying.
Rescue (Normal) has a bigger preference to use aileron.
Possibility to set the Failsafe directly in the software.
Spektrum satellites compatibility was enhanced.
Support for the AR7700 receiver with Spektrum SRXL protocol.
New events in the Flight log:
Detection for any corrupted received frame.
Checking for excess noise from the RPM Sensor.
Added support for the Velos model.
New parameter called Rotor Rotation Direction.
Subtrim and Servo Travel Correction correspond with a real servo movement now.
Graphical hints were updated.
Support for FreeBSD operating system.
Possibility to run the software even with 800x600 pixel resolution.
configuration of the rudder end-points was improved to prevent from binding.
New notification of a non-optimal cyclic and rudder ranges.
And much more!
We recommend to perform the update with the latest 2.0 software.
After the update it is necessary to re-adjust the following:
1. Channel reverses and Travel ranges in the transmitter (default settings are recommended)
2. Position
3. Swashplate (Check the servo connection)
4. Servo Reverse
5. Subtrim (tuning)
6. Throttle Range (including ESC re-calibration) and possibly Governor. (if used)
You can download it from our web pages!
New JETI Binary file is available here:
http://spirit-system.com/dl/jeti/Spirit.bin
We have achieved another milestone in the development! Version 2 arrived right now with a major bunch of news and improvements.
The update is available right now for everyone!
Major configuration improvements:
The Setup Wizard was redesigned to be perfectly simple and straightforward.
Parameters such as Pirouette Optimization and Sensor Compensations are past.
Directions of the Rescue collective pitch and Revomix are preconfigured automatically.
Spirit know a default transmitter reverses and travel ranges of a famous brands.
Channel deflections in the Diagnostic tab are based on the real sticks movement.
Parameter Position has 8 independent mounting options.
Servo reverses and Swashplate were extended.
Governor:
Algorithms were completely redesigned to improve the reaction time.
Throttle Range has a new units [microseconds] (see ESC specification).
RPM changing is significantly faster now.
Autorotation Bailout has no limitations now. (Activated with TC 12% and more)
Better immunity for a RPM sensor noise.
New parameter called Spoolup rampup for the smoothest spoolup start.
Stabilisation:
All stabilisation modes were improved to be even more useful.
Stabilisation (Acro) allow to perform even more acrobatics with aid.
New Stabilisation (Scale) for a scale flying simulation.
New kind of stabilisation called Coaxial for coaxial-like flying.
Rescue (Normal) has a bigger preference to use aileron.
Possibility to set the Failsafe directly in the software.
Spektrum satellites compatibility was enhanced.
Support for the AR7700 receiver with Spektrum SRXL protocol.
New events in the Flight log:
Detection for any corrupted received frame.
Checking for excess noise from the RPM Sensor.
Added support for the Velos model.
New parameter called Rotor Rotation Direction.
Subtrim and Servo Travel Correction correspond with a real servo movement now.
Graphical hints were updated.
Support for FreeBSD operating system.
Possibility to run the software even with 800x600 pixel resolution.
configuration of the rudder end-points was improved to prevent from binding.
New notification of a non-optimal cyclic and rudder ranges.
And much more!
We recommend to perform the update with the latest 2.0 software.
After the update it is necessary to re-adjust the following:
1. Channel reverses and Travel ranges in the transmitter (default settings are recommended)
2. Position
3. Swashplate (Check the servo connection)
4. Servo Reverse
5. Subtrim (tuning)
6. Throttle Range (including ESC re-calibration) and possibly Governor. (if used)
You can download it from our web pages!
New JETI Binary file is available here:
http://spirit-system.com/dl/jeti/Spirit.bin