Misc. Pots Cleaning.

[D.O.G.]

Hey there Tony. I was wondering how to clean or do you have a video on cleaning the pots on my AR7300BX. I'm still having a little problem with the tail responding correctly. Installing a new tail servo didn't help much. Of course my tail section of the gyro is going bad which I hope it isn't.

 

[Tony]

you can spray some electronics cleaner in there and hope for the best. But if you are suspecting the gyro going bad, then there is likely nothing you can do.

 

[D.O.G.]

you can spray some electronics cleaner in there and hope for the best. But if you are suspecting the gyro going bad, then there is likely nothing you can do.

Thanks Tony for that. When I do spray the cleaner, do I spray where the servo adapter plugs into the AR7300BX or should I open her up and spay inside?

 

[Tony]

Definitely take the case off the board. That is the only way you are going to get near the pots. And when you are spraying them, turn the pots so that you work the stuff in.