mirrorcarp27
New Member
Hi I am new to this hobby and I need help I have started to build my Tarot 450 pro V2 FBL kit helicopter and I need some help I am trying to level the swashplate but having problems. I am using the Tarot ZYX 3 Axis FBL gyro controller I have already set up my Spektrum DX6i using the software with USB to Laptop for the gyro. When my transmitter is at mid stick the swashplate is level. I also have a swashplate levelling tool that sits on top of the swashplate. This is the problem when I move my transmitter throttle stick to the high position the level tool is not sitting on channel 3 (this is the back one where the Anti rotation bracket sits) I can see a little gap. Next I take the throttle stick to low position and this time channel 1 and 2 (the front ones left and right) are not sitting on the swashplate level tool I can see a gap on both points how do I fix this so when I move the transmitter stick up and down the swashplate stays level all of the time thanks for your help
Regards
Scott
Regards
Scott