One of those days started off with me fitting all the cyclic servos up side down, not a good start. Well the helicopter is complete but for the life of me I can not get the electronics to work properly. Rudder and Gyro perfect no problems. The cyclic servos are driving me nuts. When everything appears to be working the right way the throttle/pitch control appears to be reversed. Is there a simple way for a simpleton like me to know what going on? No need for rushed replies I have put this helicopter to one side and will look at it again in about a months time. I just wanted to know where I am going wrong and yes I have cleared the TX memory and started over again about 3 times but still having problems. When, to me at least, things seemed to be working in the right sense the throttle will not go to full throw as if the swash is jammed on the main shaft but I can not see where this could happen. So, one of those days that promised to much LOL. Cheers.