Tasajara
Active Member
I have been flying FPV for a while now and thought it was time to upgrade what I have been doing.
First I changed my antennas from a Patch and rubber duck antenna to:
5 Turn Helical (9.5 dBic)
5.8GHz BlueBeam Whip Antenna
but I have done a little searching and found the same type BluBeam antenna for much less... once they get them in stock
FPV Video antenna 5.8Ghz Tx Rx SET- Skew Planar 4 bladed and 3 blade cloverleaf
As far as my Quad goes I removed the carbon fiber booms and replaced them with hard wood 3/8" sticks.
This helps give me a smoother video. The wood will soak up any vibration that balancing the props don't remove.
When using less costly motors the bell on the motor want be balanced so the wood booms do the trick.
I did a couple of videos today.. one was to show my FPV Quad and Ground Station.
The second was a FPV flight I did with my setup.
You will notice a little blur in the video, I had a smudge on my GoPro lens I did not catch.
So even though the video is smooth it looks unclear in the smudge area.
My FPV Quad and Ground Station
xRotor Spider Quad doing FPV
First I changed my antennas from a Patch and rubber duck antenna to:
5 Turn Helical (9.5 dBic)
5.8GHz BlueBeam Whip Antenna
but I have done a little searching and found the same type BluBeam antenna for much less... once they get them in stock

FPV Video antenna 5.8Ghz Tx Rx SET- Skew Planar 4 bladed and 3 blade cloverleaf
As far as my Quad goes I removed the carbon fiber booms and replaced them with hard wood 3/8" sticks.
This helps give me a smoother video. The wood will soak up any vibration that balancing the props don't remove.
When using less costly motors the bell on the motor want be balanced so the wood booms do the trick.
I did a couple of videos today.. one was to show my FPV Quad and Ground Station.
The second was a FPV flight I did with my setup.
You will notice a little blur in the video, I had a smudge on my GoPro lens I did not catch.
So even though the video is smooth it looks unclear in the smudge area.
My FPV Quad and Ground Station
xRotor Spider Quad doing FPV
Last edited by a moderator: