Misc. Need Help With Setup Of Flite Test Aura 5 Gyro

[Giby1]

I'm flying a Flight Line 1600mm Spitfire.
Using a Spektrum AR8000 receiver.
Using 6 shannels, with a Spektru, DX8 transmitter.
Just bought a Flite test Aura 5 gyro.
Can't find anything showing the complete setup using my rx with the Aura5.
Can find, setup only using 3 channels.
Can anyone help out with the setup using 6 channels.
Thanks for any help.
Giby1

 

[RandyDSok]

Here is the Wiki page which includes the quick setup guide and addendum along with other info.... FT Aura 5 Wiki - Flex Innovations Wiki


Don't confuse 6 channel with 6 Axis ... they are two separate things although the channels do connect to the servos that control the axis that your airplane has. Typically an gyro works in 3 primary axis ( two channels are often used for ailerons ) and I see that one also supports throttle. So you are only going to use the roll axis ( aileron with 1 or 2 channels ), pitch ( elevator ), and yaw ( rudder ) along with the throttle.

Sorry I can't be of more help, I never used gyro's on my airplanes and I don't have any of the products you listed... hopefully it will still provide some info that is of use.

 

[Giby1]

Thank you. Every little bit helps.
Giby1