FBL Gyro MSHbrain very hot!!!!

[wolfman76]

Ok when i was seeing up the brain through the Bluetooth went through everything when i was finished turn everything off i picked up the heli first off TX was not responding no servo movement.... I didn't think anything of it just thought maybe it became unbound from TX after i had it disconnected for long time stop i was gonna rebind it later.. I just checked it it still powers up so hopefully it isn't fried.. Anyone have any ideas as to why it got hot? I seriously don't think it is suppose to any help please!!!!? Thanks

 

[coolgabsi]

check for shorts, disconnect all servos and turn it on and let it sit for a while.. see how hot it gets.. then start plugging in one thing at a time, and see that makes it hot..

It shouldnt get hot like that

How are you powering the IKON ? how many volts feeding it ?

 

[wolfman76]

turnigy 85amp esc with 5amp sbec this one here Turnigy Brushless ESC 85A w/ 5A SBEC using a 4000 6s nanotech pack it is 5.5v output from sbec

 

[coolgabsi]

turnigy 85amp esc with 5amp sbec this one here Turnigy Brushless ESC 85A w/ 5A SBEC using a 4000 6s nanotech pack it is 5.5v output from sbec

Ok.. So you got the right voltage.

Check by taking out the servos one by one like I said.

 

[wolfman76]

I will soon ass i can thanks gaba