Ghostflyer1
Member
Well guys I went and did it again. I bought me an early Christmas present, the KDS Innova 700. I have the airframe and the electronics mounted with the exception of the ESC and the reciever. Im still trying to figure out where exactly I want to put those. As for the build, mine is a pre mainstream version and some of the changes that will be coming down the pipe if they are not already here. They used the flybar head with a locking coller for the FBL version. This means the 2 phasing pins are still on it.... I removed those on mine. KDS will be realeasing a solid *ie no holes for a flybar in it* head shortly. I also replace the tailboom supports on my with those of a Trex which are much thicker. The auto rotation pully ring uses very short screws and for added comfort I removed them and CA glued them in place along with my fingers *LOL*. Its not going anywhere. The EBAR system which is KDS's FBL unit is very interesting and it comes with the programming interface. After you go through the menu's once or twice you soon find it to be very intuitive. I have heard mixed things on this but reserve judgement until I actually try it for myself. Well thats about it so far I will be posting a build video when I complete it.