In the process of repairing the 300X. I get why people don't like these size heli's now. They are a pain to work on.
Anti-rotation bracket: sandwiched between the two frame halves, so you end up having to unscrew half the frame to spread the frame wide enough to replace it.
Tail belt: getting that sucker back on the gear is a trick.
Lots of little pieces and shims you can't lose. Wires everywhere.
Still not sure how I'm going to swash level this thing. May try the famous zip tie method. Links didn't change so should be a simple matter of subtrimming in the 7200bx setup. May also fabricate a simple leveler block.
Anti-rotation bracket: sandwiched between the two frame halves, so you end up having to unscrew half the frame to spread the frame wide enough to replace it.
Tail belt: getting that sucker back on the gear is a trick.
Lots of little pieces and shims you can't lose. Wires everywhere.
Still not sure how I'm going to swash level this thing. May try the famous zip tie method. Links didn't change so should be a simple matter of subtrimming in the 7200bx setup. May also fabricate a simple leveler block.