Right guys, first off I must say I'm a newbie at the Heli's but not Rc's I've just finished building a HK Clone ( 450 ) without any problems, Servo's all in the right direction, spools up fine Etc. so not a Total blank on what i'm doing !
Now then I've got a Rex 450 running with 3gx, spectrum 6210 receiver with 2 X Satellites and a DX6i Transmitter ( First things first ) I do not have 3gx Dongle or programme !
What's happening is when I turn the heli on the Swash goes UP when the left hand stick is pushed up the Swash comes down ! and no spooling of the Rotor, the Servo's are also slow to re-centre ( Batteries all good ! ) and the Rudder doesn't centre when Heli moved sideways.
Could all this be due to the fact the 3gx is set up for a different Transmitter ???
Now then I've got a Rex 450 running with 3gx, spectrum 6210 receiver with 2 X Satellites and a DX6i Transmitter ( First things first ) I do not have 3gx Dongle or programme !
What's happening is when I turn the heli on the Swash goes UP when the left hand stick is pushed up the Swash comes down ! and no spooling of the Rotor, the Servo's are also slow to re-centre ( Batteries all good ! ) and the Rudder doesn't centre when Heli moved sideways.
Could all this be due to the fact the 3gx is set up for a different Transmitter ???