General Esc connection

Engr_Arven

New Member
Hi guys, I've got one question regarding esc starting tune(music sound), if I connect the battery to the esc and don't hear that much sound, is there something wrong with the setup(align 3gx)? Thanks guy in advance for response!!:unconscious:
 

Tony

Staff member
The sound is actually coming out of the motor. It's a high frequency put out by the ESC that rings the motor so that you can hear it. YOu can put your hand on the motor and change the sound of it (makes it more dull when your hand is on it).
 

Engr_Arven

New Member
Thanks again sir tony for the nice info! Coz I'm wondering why it became like this,since my first set up(with ur videos help of course he he!:cheerful)sound is still good until only when i re-setup again.
 

Tony

Staff member
As long as it's still spooling up fine and still has power, I would not worry about it. I would be checking the soldering connections on the ESC and motor and battery just to be safe though.
 

Lee

Well-Known Member
Give the motor a general look over, jut incase there is anything damaged as well. Nothing stuck in there etc..
 
Top Bottom