Setups Control Runcam With Tx

bigone5500

Well-Known Member
I want to connect my runcam to my FC and be able to control it to change settings. Would I be correct in assuming I need to connect Rx and Tx to my FC Tx3 and Rx3 respectively? Please note the image to the left includes the 4 in 1 esc which is why it shows motor connections.

XJB-438_2136x.jpg
 

Tony

Staff member
I would think that is how you do it, but without it here to play with, I'm not sure. Only one way to find out though.
 
Top Bottom