I bought a blade 130x 2 months ago and then another a month ago. I have been pulling my hair out because I have had nothing but trouble with both of them. I have gone thru 2 motors, a 3-1 board, two tail servos and 2 elevator servos. I do not fly fancy, just learning and am very careful not to crash it (altho I have had a few of them but nothing to serious) I had both helis flying rock solid. Put them away after about 4 flights each. When I pulled one out the next day it flew up about 15 feet uncontrollably and then came straight down and slammed into the ground with such force it broke the landing gear in 3 pieces. After checking it out I came to the conclusion that the elevator servo went out. I am addicted to flying and get very frustrated that my helicopters after about 5 flights develope problems without crashes. Are these problems normal or am I being punished for spending my daughter's college fund on these...lol. I would appreciate feedback and encouragement if there is any. I do have to take my hat off to the techs at horizon hobbys, they have been very helpful and have replaced most of the parts free.